Add to Cart
Our Price: $29.99
Product Code: NA
A water based timber and grain filler, suitable for both interior and exterior use. Woodblend has excellent durability, minimal shrinkage and low odour. Woodblend is easy to apply and sands to an extremely fine, smooth finish. Woodblend is suitable for use on all timber species and can be coated with water or oil based paints, stains and timber finishes. This listing is for Merbau/Jarrah colour. A popular stain for our Skyfort range - see related products for more information.
Coverage: 5m2/L
Recoat: 2hrs
Clean up: Water
Size: 800 gram
Waterbased
Interior & exterior use
Sets firmly
...
Read more
A water based timber and grain filler, suitable for both interior and exterior use. Woodblend has excellent durability, minimal shrinkage and low odour. Woodblend is easy to apply and sands to an extremely fine, smooth finish. Woodblend is suitable for use on all timber species and can be coated with water or oil based paints, stains and timber finishes. This listing is for Merbau/Jarrah colour. A popular stain for our Skyfort range - see related products for more information.
Coverage: 5m2/L
Recoat: 2hrs
Clean up: Water
Size: 800 gram
Waterbased
Interior & exterior use
Sets firmly
Does not shrink or crack
Surface Prep: Surface must be in sound condition, clean, dry and free from dust, grease, wax and oil. Indentations and holes must be clear of all loose material.
v
Use on all interior and exterior timber surfaces including weatherboards, decking, flooring and furniture. Woodblend can be used to fill nail holes, splits, knot holes and as a grain filler to give a smooth finish to timber surfaces.
ENVIRONMENTALLY RESPONSIBLE - Being water based, Woodblend emits significantly less VOC’s (volatile organic compounds) into the atmosphere than traditional oil based putties. So,
combined with being healthier to use, Woodblend is much gentler on the environment.
APPLICATION
Methods: Filling blade or knife
1. Apply WoodBlend with a flexible filling blade or knife. Fill deep holes in approx. 10mm stages, allowing two hours drying time between each stage.
2. To ease application, dampen blade with water.
3. Wipe off excess with a slightly damp sponge. When dry, sand to a smooth finish.
4. When using clear finishes, apply WoodBlend after the first coat of clear to minimise smudging.
5. For use as a grain filler, thin WoodBlend with 5-10% water to achieve the required consistency. Apply with a flexible filling blade or knife and allow to dry. When dry, sand back to bare timber, leaving filler only in the grain.
IMPORTANT: Keep container tightly closed when not in use.
Tell a friend about this product
Ask question about this product
Add to Cart